Y-Maze

* Semi Automatic Y Shaped Maze for study of shock motivated brightness discrimination responses in rats. With wire grill, cue light, grill charge and rat presence indicators, adjustable shock stimulus 0.1 to 1.0 mA. remote control unit permits easy handling and operation of pre-programmed experimental procedure from distance without touching or disturbing the animal.

Automatic Y made : Same as above but with timer from 0 to 999.9 second to measure the latency time and also monitors the movement of rat automatically.

Water Deionization Apparatus

COSLAB Model PI – 99

The plant consists of one cation exchanger column containing cation exchanger resin. One anion exchanger column containing anion exchanger resin. Plant is mounted on M.S. stand with assembly of valves and tubing. One conductivity meter with cell to monitor the ionised solids of purified water and thus control the functions of demineralization. The meter is direct reading having reading heavy range 0.40 microns / cm.

* Cap. of flow rate 30 to 50 Lit/hr

Cap of flow rare 75 to 100 Lit / hr.

Vortex Mixer

Vibration type, variable speed, neoprene cup impart vigorous agitation to tubes, with touch ON/OFF switch.

U.V. Inspection Cabinet Long Wave

COSLAB Model PI – 97

1. U.V. Chromatography : Inspection cabinet for viewing and detecting separated substances on T.L.C. layers fitted with long wave (365nm) U.V. lamp for use on 220V A.C.
2. U.V. Chromatography : Inspection cabinet for viewing and detecting separating substances on T.L.C. layers fitted with two different wave length U.V. tubes for use on 220V A.C.
3. U.V. Inspection Cabinet (Short and Long Wave) Dual Wave : Having imported filters fitted with separate low pressure mercury vapour tubes for short U.V. (254nm) and long U.V. (365nm) plus separate lamp for visible light, the low pressure mercury vapour tubes in this model facilitate immediate use for inspection as you switch on.
4. Separate U.V. tube.

Soxhlet Extraction

# Heater Mantle Type : Unit of three or six. Available in different capacities.
# Hot Plate Type : Tis heater is used to heat soxhlet flasks and it consists of a mild steel housing. Unit of three or six. Three or six hot plates of dia 4 1/2" are mounted on top of the housing and can be operated by individual a) ON/OFF switch b) Rotary switch c) Energy regulator as per requirements. Mild steel housing has two rods with two adjustable cross rods on which the glass apparatus can be fixed. Electrically operated on 220 / 230 volts AC mains with max. power rating of 900 watts. The apparatus is supplied without glass parts.
# Glass Parts : Complete with one flask and bulb condenser with interchangeable joints. Different capacities.

Student Organ Bath

A prespex organ bath with fine thermostatic temperature control. Complete with accessories, bath size 8" x 4" x 5" with leak proof dovetailed joints, fitted on sturdy metal frame.

Sieve Shaker (Hand Operated)

Can accommodate up to 7 sieves of 8" dia during a train or gears operated by a hand wheel. A heavy fly wheel ensured smooth operation. Supplied without test sieves and lid receiver

Rotarod Apparatus - five apparatus

(Latest with digital counter) For determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice. Consisting of Five compartments of 75mm width each with a rotating rod of 25mm diameter having speeds of 5, 10, 15, 20 and 25 rpm with time interval counter in each compartments.

Rotarod Apparatus - four compartments

COSLAB Model PI – 73

(Latest with digital counter) For determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice. Consisting of four compartments of 75mm width each with a rotating rod of 25mm diameter having speeds of 5, 10, 15, 20 and 25 rpm with time interval counter in each compartments.

Rotarod Apparatus

COSLAB Model PI – 72

(Latest with digital counter) For determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice. Consisting of two or three or four compartments of 75mm width each with a rotating rod of 25mm diameter having speeds of 5, 10, 15, 20 and 25 rpm with time interval counter in each compartments.

Tray Dryer

COSLAB Model CLE – 127

Different sizes Tray Dryer are available as follows but without trays. Chamber size in mm (WxDxH) approx tray capacity :-

* 430 x 840 x 650mm 8 Trays 16"x32"x1 1/4" size
* 430 x 840 x 910mm 12 Trays −− do −−
* 910 x 840 x 910mm 24 Trays −− do −−
* 960 x 1270 x 1450mm 48 Trays −− do −−
* 960 x 1700 x 1700mm 96 Trays −− do −−

Tincture Press

COSLAB Model PI – 93

Extra heavy duty for making tinctures, decotious infusion etc. cap. 1 Lit. stainless steel disc, with screw drive, stainless steel mesh as inner perforated vessel with stop cock.

Sieves For Powder Shifting

Stainless Steel wire mesh size 10, 16, 22, 30, 44, 60, 80, 8" dia mounted in a brass rim 2" high machine made and fit one above the other.
−− do −− 100 and 120 No

Tele-thermometer:

COSLAB Model PI – 89

Use for Pyrogen testing 0 to 6 channel (Digital displpay Temperature) with 6 probes.
−− do −− with single probe.

Tablet Triturate Moulds

COSLAB Model PI – 81

With pegs and holes. Phenolic die cast with acrylic sheet with set of holes and guide holes. 30 moulds set.

Spirometer

COSLAB Model PI – 79

6 litre capacity for vital capacity, or use as a gasometer with chain compensated counter balance to the float balanced through cut its movement. Pulley calibrated to denote volume inlet and outlet tubes, side cock for gases, cock for draining off water strong construction. Complete with corrugated tube mouth piece & recording lever.

Sherrington Rotating Drum

COSLAB Model PI – 70

Electrical E-8 Student Kymograph with special heavy duty motor, oil lapped gear systems, speeds from 0.12 mm/sec to 640 mm/sec, in 8 steps, jerk free running, instantaneous start & stop clutch. Stainless steel spindle with screw lift 15 x 15cm cylinder with levelling screws, pilot lamp, plug & cord.

Rabbit Holder

COSLAB Model PI – 68

Polishing Pan

COSLAB Model PI – 62

Detachable polishing pan for use with tablet coating pan. Made of mild steel painted and provided with inner lining of superior canvas cloth, inner dia 12" x 8" high with opening of 7" dia neck used for polishing tablets.

Pole Climbing Apparatus

COSLAB Model PI – 65

New improved model built in solid state buzzer and stimulator to provide electrical shocks of 400V in pulsating rates 0.2mA a frequency of 5 per sec for a duration controlled manually or by built in 30 second timer. Output available for recording on Kymograph or polygraph complete to work on 220V AC.

Rat Operating Table (Tilting)

Operation Table Large Size

made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding IN or OUT blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the recepatable after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the S.S. top is heated, a set of electric lamps placed to effect balanced heat distribution dog holder with its SS upright slide along slot in the top useful for fixing accessories. A S.S. swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steep pipe frame handle and wheels for conscience in moving. Table top size 51" x 18" x 40" high.

Motor Driven Disintegrator

Laboratory Size, hammer type with H.P. heavy duty motor (single phase) 220 volts, 50C/s A.C. consisting of four steel hammers fixed to a disc of 3" in dia 1" thick through which passes a shaft being revolved at 3000 RPM. The hammers are enclosed in a C.I. drum, the sides and upper surface of which are roughened in a C.I. drum, the sides and upper surface of which are roughned. The inner surface is undulating. The lower part of drum is made of chrome plated brass and is detachable so that SS sieves of different mesh size (a set of three sieves of coarse, medium & fine) supplied with the instrument can be easily placed. Hopper is made of die casted aluminium, built on angle iron frame of size 24" x 14" x 20" high.

Mechanical Stirrer (laboratory Stirrer)

Fitted with speed regulator, height and space adjustable. 1/20 H.P. AC/DC motor.

Karl Fischer Apparatus for Moisture Content Determination

COSLAB Model PI – 53

1. Microprocessor K.F. moisture titrator with built in magnetic stirrer, auto computation of moisture in ppm, %age and mg H2O storage of date, time, batch no. & final results of 20 titrations. K.F. reagent dispensing by motorised process. Final results are flashed on 8 digit display. External printer attachment facility available.
2. Auto Karl Fischer Titrimeter (Deluxe Model) having seperate control and stirring units with array of 10 LED, buzzer auto zero burette, adjustable timer, dual platinum electrode and other accessories.
3. Auto Karl Fischer Titrimeter with seperate control and stirrer unit auto zero burette, dual platinum electrode & other accessories.

Infrared Moisture Balance

COSLAB Model PI – 52
A basic method for determination of moisture content, measure percent by weighing and drying simultaneously. Infra red radiation are reflected by a bulb and its temperature is controlled by a regulator.
The balance scale is divided in terms of moisture content on wet weight basic.
Specifications :
Range :

0 - 100 %

Accuracy :


±0.2%

Dimension :


28 x 35cm

Weight :


20Kg

Sample Weight :


5gm, 10gm, 20gm, 25gm as required

A.C. Mains:


220V 50Hz

Incubators

Thermostatically controlled by thermostat ambient to 80°C with a sensitivity ±1°C. Beaded heating elements are placed in ribs at bottom and sides. Double walled inside aluminium or stainless steel and outside mild steel sheet painted with attractive enamel. Door has double glass viewing, built in horizontal L-shape thermometer with perforated adjustable shelves, two pilot lamps, ON/OFF switch. To work on 220/230 volts A.C.
Inner Chamber size Aluminium & S.S.

* 300 x 300 x 300mm (12"x12"x12")
* 350 x 350 x 350mm (14"x14"x14")
* 300 x 400 x 400mm (16" x 16" x 16")

Hot Plates

Round 20cm (8") dia single operated

* Complete with three step rotary switch, plug & cord
* Same as above with double plates of 8" dia
* Hot plates rectangular electrically operated complete with 3 step switch with cord and plug.
o 300 x 250mm (12" x 10")
o 400 x 250mm (16" x 10")
o 450 x 300mm (18" x 12")
o 600 x 180mm (24" x 18")

Hot Air Sterlizer (Oven)

COSLAB Model CLE – 101

Double walled suitably insulated temp. control 50°C to 250°C ±1°C by E.G.O. thermostat inner chamber aluminium / stainless steel. Fitted with L shape thermometer. Available in Aluminium & S,S, in various sizes.
Inner chamber size :

* 12" x 12" x 12"
* 14" x 14" x 14"
* 16" x 16" x 16"
* 18" x 18" x 18"
* 24" x 18" x 18"
* 24" x 24" x 24"
* 36" x 24" x 18"

Histamine Chambers

COSLAB Model PI – 51

A compact histamine aerosol apparatus consisting of a clear perspex exposition chamber divided in two sections and all glass neubilizer and dial type sphygmomanometer for assay of anti-histamines drug on guinea-pigs etc.

Heating Mantles

Made of glass yarn with On/Off switch. available in following sizes :-

* 50ml 60Watt
* 100ml 60Watt
* 250ml 150Watt
* 500ml 200Watt
* 1 Lit. 300Watt
* 2 Lit. 450Watt
* 3 Lit. 450Watt
* 5 Lit. 600Watt
* 10 Lit. 2x500Watt

Tablet Hardness Tester Pfizer Type

COSLAB Model PI – 84

Capacity 0 to 20Kg dial type, packed in niced polished wooden box.

Tablet Hardness Tester Monsanto Type

COSLAB Model PI – 83

A fairly handy instrument for taking quick readings for the hardness of tablets. It is made of brass turned parts. Heavily chrome plated the scale is 0 to 20KG. The index mark and division is in reading . Scale is adjustable for zero setting as per size of the tablets.

Fume Hood

COSLAB Model PI – 49

Wooden with sunmica. basic unit with table, with F.R.P. wall lining, flourscent light, complete with exhaust system, fume duct PVC (PRF)
Working Area : 2' x 2' x 2' , 3' x 2' x 2'

Electronic Stimulator

COSLAB Model PI – 41

Available in five models

1. Student Stimulators Transistorised : Out put 0-25 DC in two steps, duration .5 ro 1.5ms frequency 5 to 100 c/s in 11 steps, modes, single, repetitive or an external trigger, for 220V 50Hz.
2. Student Electronic Stimulator Latest Design :
* Frequency continuously variable from 0.1Hz to 100Hz in 3 decades of 0.1 to 1, 1 to 10 and 10 to 100 selectable through push-button controls and one continuously variable control.
* Output voltage continuously variable from 0 to 30V in two steps of 1 to 3 and 1 to 30, selectable through a switch.
* Fixed pulse duration 1m sec
* Single & external trig. single pulse facility.
* Sensitive speaker to give audible indication or each output
* High stability new circuitry minimises external interference.
3. Stimulator General Purpose : Provides rectangular pulse of controlled amptitude 0.1 - 100V. Frequency 0.1 - 1000 PPS & width 0.01 to 100mm.

Research Stimulator With R.F. Isolation unit : Provides rectangular pulse of controlled polarity, Amptitude 1.5mV to 150V, frequency 0.1 to 10 KCS delay 10 micro sec to 1 sec & width 10 micro sec to 1 sec.

Analgesiomfeter (Eddy's Hot Plate)

COSLAB Model PI – 5

Consisting of 30x30cms heating surface with perpex enclosure and solid state temperature controller with micro-controller based digital temperature indicator controller to set surface temp between 30°C to 80°C.

Double Unit Organ Bath

COSLAB Model PI – 58

A perspex organ bath with fine thermostatic temperature control, electric stirrer and complete set of accessories, making it a versatile unit for all research work. Bath 12"x9"x8", with leak proof dovetailed joints, resting in sturdy metal frame; top of the bath carries a 1"x3/8" thick band, for fixing accessories, inside the bath is a metal sheathed heating element (easily replaceable) controlled by means of a fine adjustable thermostat with sensitivity ±1°C.
The stirrer unit is completely independent and dips in the bath in one corner, fixing on its special stainless steel upright. A M.S. junction box is fitted to the bath frame and carries all the electrical leads and connections, two pilot lamps indicate functioning of the thermostat and stirrer.
Standard components are :

* Double set of glass inner vessels
* Oxygen tubes
* Warming coils
* Two stainless steel capillary levers
* Four stainless steel uprights with boss heads
* X blocks

Dissolution Rate Test Equipment : three stage

Dissolution Rate Test Equipment

COSLAB Model PI – 37

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000ml. Vessel made from Borosil Glass and digital temperature control. Variable speed motor, with 30 cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1°C. A cylindrical glass vessel of 1000ml capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 RPM. The shaft is 6mm dia 30cms on with basket fitted at end rotates smoothly and without any significant wobble. The basket consists of two parts one of which is attached to the shaft. It is of solid metal except for 2mm vent and is screwed on the main shaft. Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36mm x 25mm dia. The equipment is workable on 220 volts 50 C/s A.C.

Prescription Balance

COSLAB Model PI – 63

Preferably Torsion with a removable glass pan or S.S pan suitable for weighing 50gms to 200gms and sensitivity 30gms for one division indicator shifting on the index plates (Known as dispensing balance) Available in following ranges

* 50gms
* 100gms
* 200gms

Digital Bulk Density Apparatus

COSLAB Model PI – 20

Friability Test Apparatus - double drum

Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perspex sheet 6.4mm thick ) 300mm dia x 35mm deep and white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 RPM by a geared motor and the rotation period is controlled by a timer (imported time switch duration of 1 to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 Volts 50 C/s AC. Digital models also available.

Friability Test Apparatus

Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perspex sheet 6.4mm thick ) 300mm dia x 35mm deep and white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 RPM by a geared motor and the rotation period is controlled by a timer (imported time switch duration of 1 to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 Volts 50 C/s AC. Digital models also available.

Colony Counter

COSLAB Model CLEM – 36

Digital Display, these are designed to provide light effects for multipurpose viewing in bacteriology, virology & Mycology labs. An ideal instrument for counting bacterial and mould colonies in culture work. It provides uniform flare free illumination to minimise the strain on eyes and clearly defines even small colonies. A 100mm dia lens covers the entire illuminations field and its magnification assures highly accurate results. Counting plate with standard wolfhugel ruling ensures clealy differentiated and sharply defined colonies. Supplied complete with counting plate, lens, cord and plug.

Digital Potentiometer